home *** CD-ROM | disk | FTP | other *** search
- Path: news.telepac.pt!usenet
- From: pmcardoso@mail.telepac.pt (Paulo Cardoso)
- Newsgroups: comp.sys.amiga.applications
- Subject: Printing PROBLEM ;(((
- Date: 21 Feb 1996 18:37:54 GMT
- Organization: telepac
- Message-ID: <1699.6625T927T1997@mail.telepac.pt>
- NNTP-Posting-Host: c1_p12.telepac.pt
- X-Newsreader: THOR 2.2 (Amiga;TCP/IP)
-
-
- ***HelP*** any0ne..
-
-
- I'm having _BiG_ problems printing in FW3 with my HP_540. I'm using a HP
- driver, siZe:
- 9092b.
-
- The problems are, in the graphic menu i've 3 in density & 3 Thre. in the
- config, well with 3 i've got 150x150dpi, but if i've choose 4 with 300x300
- with 3 down in the other config.. after the jog is done the page is very
- _small_, it prints my job in the upper right corner in 5points or less :(((
-
- But with the graphics config in Density=3 & Thr=3 i get a perfect printing
- job... Using the Studio2 HP printer, it's faster but then FW gives-me a GURU
- after the first page comes out :(((((( If i've got a paper report, say 22
- pages....... Reboot, Print page 2, reboot, print page 3..................
- ....................... so on, so on.....................................
-
-
- Ha, then after every page, the printer or the program enjects a blank
- page..... after the job done :????.... Say a report with 22 pages, printing
- with this kind of problems will became a /biG/ report with 44pages, 22
- blanks!!!! is this possivel.... arhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh!!!
-
-
- Can anyone tell me what's *rong* :?????
-
-
- --
- ._______________________________________________________________518b_.
- .| __ __ |.
- : |/ )iNTERNet: pmcardoso@mail.telepac.pt - SySoP lASt rESORt BBS ( \| ;
- `' / iNet GaTeWay: paulo.cardoso@p0.f43.n361.z2.fidonet.org \ `'
- .'\ fIdO: Paulo Cardoso@2:361/43.0 meTNEt: Vortex@6000:6662/1.0 `.
- /__\\_______________________________________ __ _ _ _ ___//_\
- ' lOcaTEd iN PoRtUGAl `
-
-